Jacuzzi HE96000 Installation And Operation Instructions Manual

Also see for AMIGA PLUS: Installation and operating instructions Manual

Contents

Jacuzzi HE96000 Installation And Operation Instructions Manual Manual pdf 15 page image

Comfort PLUS Whirlpool BathInstallation and Operation www.jacuzzi.com Page 15EnglishColored Lighting OperationThe colored lighting default is constant blue. Pressing the ( ) button activates color scroll in this order: blue, teal,green, yellow, orange, red, pink, purple and then returns to blue and continuously repeats. To stop on a selected color,press the ( ) button again. Pressing the ( ) button activates color scroll in this order: blue, purple, pink, red, orange,yellow, green, teal and then returns to blue and continuously repeats. To stop on a selected color, press the ( ) buttonagain.White Lighting OperationThere are five white light intensities. Press the ( ) button to increase light intensity. Press the ( ) button to decreaselight intensity.Chromatherapy (Light) Operation (Cont)Turn the left air valve dial to active the left air valves.Turn the right air valve dial to activate the right airvalves.The amount of air induced into the whirlpool jets can becontrolled from maximum to none.Air Flow (if equipped) Turn the dial clockwise to reducethe air flow Turn the dial counter-clockwise to increase theair flow clockwise to reduce the air flowControlling Whirlpool Direction and FlowDirection -All Jacuzzi jets, except the rotating neck jets, can be directionallyadjusted. To change the direction of the water flow, swivel the jetnozzle to the desired angle. The jets can be directed individuallytoward any location on your body to provide a hydromassage.The jets can also be adjusted so that they all point in the samedirection (clockwise or counterclockwise) to circulate the water ina circular motion around the bath, causing a total whirlpool effect.Water Force -Most Jacuzzi jets are designed for flow adjustment. For robustaction, increase the force of the flow by rotating the nozzle, orface, to the left (counterclockwise). For a more gentle effect, or toclose off the jet, rotate the nozzle, or face, to the right (clockwise).Closing one or more jets can increase the water force in theremaining jets.The rotating neck jets, and some AccuPro™ jets, cannot beadjusted for water force.Never run the whirlpool system with all the jets closed.Multidirectional JetsTo remove accumulations of bathtub residue from the whirlpool system, it is recommended that a whirlpool bathtub becleaned at least twice a month. For best results, however, we recommend that you clean your whirlpool bathtub aftereach use using, Systems Clean™, our exclusive two-part plumbing system cleaner made specifically for whirlpoolbathtubs. Systems Clean™ is available through an authorized Jacuzzi Whirlpool Bath Distributor or by calling us directat 1-800-288-4002.Purging the Whirlpool SystemFigure 14Figure 15