Jacuzzi J-400 Series Installation Manual And Use & Maintenance

Also see for J - 415: Instructions for preinstallation Instructions for preinstallation Owner's manual Owner's manual Owner's manual

Jacuzzi J-400 Series Installation Manual And Use & Maintenance Manual pdf 60 page image

60Home menuThe Home Menu, provides access to spa functions and pro-gramming. Operation is made easy by the interactive control pa-nel. If there is no activity for 5 minutes, the LCD display will time-out into a sleep mode. To reactivate the display, just tap the di-splay screen. Home Menu Control ButtonsWhen a feature is on, the button will have a blue inner glow.Temperature Control: Allows you to adjust the settemperature of the spa:Increase the temperature by tapping ( ) in 1° in-crements.Decrease the temperature by tapping ( ) in 1° in-crements.Note: The temperature range for the spa is 18.33 to 40°C(65 to 104°F).Jet Button: Tap to access the menu to operate the jetspump.Light Button: Tap to access the menu to operate thelighting options.CLEARRAY Button: Tap to activate the CLEARRAY ondemand feature.Settings Button: Tap to access the programming andsetting menus.Music Button: Tap to access the menu to operate theaudio system and settings.Note: If the spa does not have the stereo option, the-re will not be a button on the control panel.Error Indicator Icon: Displays when there is error mes-sage that needs to be addressed. The icon will also ap-pear under the Temperature reading as a reminder.Invert Button: Tap to invert the display image.Heat ON Icon: Displays whenever the heater is on andheating the water.Lock Button: Displays when one of the lock modes isenabled.Wi-Fi Icon: Displays when there is a Wi-Fi connectionto the home router.Time Indicator: The time will always be shown whenthe Home Menu is displayed. The appearance will varydepending on whether the clock is set to a 12-Hour or24-Hour configuration. The default setting is 12-Hour.Note: The time does NOT automatically adjust for daylight savingtime. The time must be manually adjusted.Operating Instructions ProTouch™ Control PanelYour Jacuzzi spa is equipped with a ProTouch control panel; mas-sage selectors, and air control knobs located on the top rim of thespa. These controls let you operate many of the special functionsof your Jacuzzi spa. Activating the Jets PumpsFrom the Home Menu, tap ( ) to enter the Jets Pump Submenu.The panel will display the Jets Pump Submenu.Note: Once you enter the Jets Pump Submenu, all the pumps will acti-vate. You can turn off the jets pump by tapping the jets pump button.Jets Pump 1 ButtonJets Pump 2 Button (if applicable)Jets Pump 3 Button (if applicable)Back Button: Tap to go back to the previous menu.Invert Button: Tap to invert the display image.1. Tap the Jets 1 button to turn the pump#1 on and off.2. Tap the Jets 2 button to turn thepump #2 on and off.3. Tap the Jets 3 button to turn thepump #3 on and off.4. When a jets pump is on, the button willhave a blue inner glow.Note: Auto Turn Off — Anytime a pump has been manually tur-ned on, it will automatically turn off after approximately 20 minu-tes. If at this time you desire more jet operation you may simplyturn the pump(s) back on.1006:45p1 2JETS1006:45pON6:45 PM131 1ON OFF