68Programming the LanguageFrom the Settings Menu, tap or to highlight the “Lan-guage” menu tab in Orange.Tap to enter the language options.There are 4 languages to select from: English, French, Deutsch,and Spanish.To select a language, tap ( ) next to the language you wantto display.Tap to return to the “Settings” Menu.Units DisplayFrom the Settings Menu, tap or to highlight the “Units”Menu tab in Orange.Tap to enter the selection menu.Tap ( ) next to the unit of measure that you want to display.Tap a few times to return to the Main Menu.System InformationThis menu will display the current information for the spa. Fromthe Settings Menu, tap or to highlight the “System Infor-mation” Menu tab in Orange.Tap to enter the selection menu. There are no selec-tions that can be made. The menu simply provides information.Spa maintenanceProper and regular maintenance of your spa will help it retain itsbeauty and performance. Your authorized Jacuzzi dealer can sup-ply you with all the information, supplies, and accessory productsyou will need to accomplish this.Information regarding spa cleaning and maintenance and theproducts to be used can be found in the catalogue-guide pro-vided with the product. Cleaning the Filter CartridgesA reminder message appears on the control panel display aftera specified number days to remind you to clean the skimmer fil-ter and to check the polishing bag filter. This reminder must bereset at each filter cleaning interval. Refer to Section “Water CareProgramming” for additional information and programmingdetails. Your new spa is equipped with an advanced 2-Stage fil-tration system. Fine debris are filtered by the circulation pumpdrawing water through the ProClarity™/ProClear™ skimmer andpleated filter cartridges 8 hours (unless programmed otherwise).Large debris are filtered when jets pump 1 is running when thespa is in use or during a programmed filter cycle. These pumpsdraw water from footwell suction fitting and through a second-ary water polishing bag filter and additional filter. Cleaning the filters and filter bagTo ensure optimum performance:The ProClarity™ filter cartridge (A) must be cleaned every monthand replaced every 18 months.The ProClarity Depth filter (B) must be replaced every 3 months.The ProClarity filter canister (C) can be rinsed when the filtersare cleaned.ThefiltercartridgefortheProClearIIskimmer(D)mustbecleanedmonthly and replaced every 18 months.The ProClarity debris bag (E) should be checked and emptiedmonthly.To accomplish this, refer to the following filter cleaning proce-dure.Note: Do not attempt to wash the ProClarity depth filter (B) and theProClear/ProClarity debris bag (E) or it will come apart!ReminderIt’s time to clean or replaceyour ProClarity and Pro-Clear filters. Contact yourauthorized dealer if newfilters are needed.snoozeresetHeat & FilterSystem InformationUnitsWater TempHiLimit TempSpa StateFlow SensorAmbient TempDIP Switches 0010000000FlowClosed<150 F99 F97 FSETTINGS System InformationSystem InformationHeat & FilterLanguageUnitsSETTINGSFºCºUnitsUnitsUnitsTime & DateLanguageSETTINGSEnglishFrenchDeutschEspañolLanguageLanguageTimeDateTime & Date241 30 2015