Page 34A. To control the intensity of the interior lights follow the stepsbelow.1. The “Bright” feature controls the intensity of the interiorlights. Use or to select your intensity level. Thelevels range from 5 to 0, as follows: 5 = 100%,4 = 80%, 3 = 60%, 2 = 40%, 1 = 20% and 0 = 0%.Note: The default intensity level is 3.2. This feature is available for the following selections: “Waterfall,”“Above,” “Under” and “All.”B. To control the speed of the interior lights follow the steps below.1. The “Speed” feature controls the speed of the colorblending, measured in seconds. Use or toselect speed rotation. The levels range from 5 to 0, asfollows: 5 = 5 secs, 4 = 10 secs, 3 = 15 secs,2 = 30 secs, 1 = 60 secs and 0 = single color.Note: The default speed interval is 0.2. This feature is available for the following selections: “Waterfall,”“Above,” “Under” and “All.”C. To select a solid color for the interior lights follow the stepsbelow.1. To make a selection tap the color block on thedisplay. Colors available are White, Blue, Green,Yellow, Orange, Red, and Pink.Note: The default color will always be the last color used.2. This feature is available for the following selections: “Waterfall,”“Above,” “Under” and “All.”11.5 Exterior LightsThe exterior corner lighting has 4 settings(Figure 11.5a). The lights display a solidWhite color only. By continually tappingyou will scroll through the following:1. OFF: Exterior lights are turned off.2. MID: Solid White color with a 50% intensity level.3. ON: Solid White color with a 100% intensity level.4. AUTO: Solid White color with a 100% intensitylevel. Lights are on from 7:00 pm to 12:00 am.Note: “AUTO” is the default setting.brightFigure 11.4bspeedFigure 11.4cFigure 11.4dLIGHTSInteriorExteriorExperience>>Figure 11.5a