Janam XM5 User Manual
Also see for XM5: User manual
                                                                                                   | |
Contents
| 
40Single Ethernet CradleThe Single Ethernet cradle is used to charge the battery and can be used to communicate datafrom the terminal to a PC/laptop via the Ethernet port.For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12.4.14. MicroUSB CableThe MicroUSB cable is used when communicating between the terminal and a host computer totransfer data via the USB interface.4.15. Li-ion Battery PackThe Li-ion battery pack provides the main power supply for the terminal.4.16. Battery PowerThe battery must be charged to full capacity before using the XM5 for the first time!Charge the main battery pack for a minimum of 5 hours before initial use.4.17. Main Battery PackStandard Capacity: Li-ion 3.7V/4000mAh/14.8WhThe Li-ion battery pack is the primary power source for the Mobile computer as well as for theinternal backup battery.Changing the Main Battery PackBefore changing a battery pack, press the Power key to put the terminal in Suspend Mode sothat operations are suspended before removing the main power source. Always put the terminalin Suspend Mode prior to changing the battery.☞NOTE: The battery door must be installed prior to booting the unit.Charging Options• AC Power Supply to USB Port direct• Single slot docking cradle/Single slot Ethernet cradle• Four slot battery charger• Spare battery charging well in the back of either the XM5 USB single slot cradle or Ethernetcradle.Charging TimeThe standard capacity 4000mAh Li-ion battery pack requires five hours to charge. |
Related manuals for Janam XM5
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine