Janam XM5 User Manual
Also see for XM5: User manual
                                                                                                   | |
Contents
| 
7510.3. Wireless RadiosThere are four radio options: 802.11 a/b/g/n Bluetooth, Phone and GPS.1. 802.11 a/b/g/n (WLAN configuration): Integrated Wi-Fi (802.11a/b/g/n Radio), up to72.2Mbps2. Bluetooth (WPAN configuration): Integrated Bluetooth v2.1+EDR3. Phone (WWAN configuration): 3G WWAN HSPA Module4. GPS: Module inherent to HSPA Module5. NFC : 13.56MHz HF, ISO14443A, ISO14443B & ISO15693 are supported.☞NOTE: XM5 does not provide all Bluetooth profiles.10.4. Connecting the Terminal to a Wireless NetworkYou connect the XM5 to a wireless network through the on-board radio (802.11a/b/g/n,Bluetooth and/or Phone).Each radio has its own configuration program and requires specific information about thewireless network to connect. Successful connection depends on your network infrastructureabout which you will need specific information from your network administrator.☞NOTE: 802.11 a/b/g/n radio module is off by default.☞NOTE: Suspending the terminal powers off the 802.11 a/b/g/n radio and drops the radio connection. When theterminal resumes, depending on the radio power mode and security protocol selected, it may take up to 30seconds for the 802.11 a/b/g/n radio drivers to re-associate the radio to the network.☞NOTE: Area coverage and radio performance may vary, due to environmental conditions, access points types orinterference caused by other devices (microwave ovens, radio transmitters, etc.).Turning the Wi-Fi Networking On/Off1. Touch All Apps > Settings2. Touch the Wi-Fi OFF/ON toggle box to turn the radio or . |
Related manuals for Janam XM5
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine