516.4. Activating the Imager/ScannerWhen a scanning application is open, press the Scan key to activate the imager/scanner.6.5. Using DemosThe XM5 comes preloaded with apps to demonstrate certain features of the device. There aretwo Demos that feature the imager/scanner engine: Image Demo and Scan Demo.To access these demos, tap All Apps > Demos.• Select Scan Demo to verify decoding, or• Select Image Demo to verify imaging (not available on device using the N4313 laserengine).6.6. DecodingThe XM5 supports Full-area Imaging decode mode.Full-area ImagingWith full-area imaging the XM5 supports omni-directional aiming meaning that apositive read can be obtained from many positions. For details, see Omni-DirectionalScanning Positions (paragraph 6.10).6.7. To Decode a Bar Code1. Tap All Apps -> Demos -> Scan Demo.2. Position the XM5 over one of the Sample Bar Codes (paragraph 6.9).A range of 4–10 inches (10–25 cm) from the bar code is recommended.3. Project the aiming brackets by pressing and holding the Scan key. The Scan LED lights red.4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in linewith the bar code to achieve optimal decoding; Omni-Directional Scanning Positions(paragraph 6.10).5. When the bar code is successfully decoded, the decode LED lights green and the terminalbeeps.
