Jandy Pro Series Owner's Manual
Also see for Jandy Pro Series: ManualInstallation and operation manualInstallation manualInstallation and operation manualInstallation and operation
            | |
Page 10 ENGLISH Nicheless Underwater LED Lights | Owner’s Manual NicheNicheless Underwater LED Lights | Owner’s Manual Niche4.2 To Reset to the Beginning of the Color SequenceBegin this procedure with the light turned ON.Turn the light OFF, wait five (5) seconds, then turn ON, the light will returnto the beginning of the color cycle (Alpine White).NOTE To synchronize colors on multiple Jandy Pro Series NichelessUnderwater LED Light systems wired to separate switches, performthe above actions on all of their switches simultaneously. All JandyPro Series Nicheless Underwater LED Lights will synchronizeautomatically if activated by the same switch. No other accessoriesare required.Section 5. Twelve (12) Volt InstallationA 12-14 Volt AC Transformer must be used to power all 12-Volt lights.NOTE For optimum performance Jandy Pro Series recommends notexceeding the load factor specified by the instructions included withthe transformer.To ensure maximum safety, use only a Class 2 transformer that can supply12-14 Volts AC to power all 12-Volt lights. The transformer must be listedor certified by a Nationally Recognized Testing Laboratory (NRTL) for theintended use.CAUTIONTo prevent risk of fire which could result in property damage,and to ensure optimum performance, do not exceed the loadfactor specified in the instructions provided by the transformermanufacturer . |
Related manuals for Jandy Jandy Pro Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine