Jandy Pro Series Owner's Manual
Also see for Jandy Pro Series: ManualInstallation and operation manualOwner's manualInstallation manualInstallation and operation manual
                    | |
Contents
| 
Page 14ENGLISH Nicheless Underwater LED Lights | Owner’s Manual Niche2. The lights have memory. If the lights are off for 10 seconds or more, thenext time the lights are turned on, they will go to white for approximately10-15 seconds and then return to the last color mode they were onprior to being turned off. This function allows you to keep your lightsreturning to your favorite color mode every time the lights are turnedback on.NOTE To synchronize colors on multiple S-Series Nicheless UnderwaterLED Light systems wired to separate switches, perform theabove actions on all of their switches simultaneously. All S-SeriesNicheless Underwater LED Lights will synchronize automatically ifactivated by the same switch. No other accessories are required.Section 7. H-Series Nicheless UnderwaterLED Light Operating Instructions7.1 Light Synchronization for H-Series Lights1. Turn the light ON. The lights will first come on white for 15 seconds andthen return to the color mode it was on prior to being turned off.2. H-Series Lights may be operated independently or together dependingupon the initial installation of your lights. All H-Series lights that arewired to the same 12V Transformer/Switch will synchronize theiroperation of the 17 Color modes. If they do get out of sync, turn theswitch on then back off - wait between 6 and 9 seconds and turn theswitch back on. They should now all be in position #1.7.2 Operating the H-Series Lights1. To move to the next color mode, turn the lights off for 1-3 seconds andturn back on. Repeat until desired color mode is found.Example: If you are now on Deep Blue and want the lights to be White, then thelights must be turned off and on 5 times to bring you to White. |
Related manuals for Jandy Jandy Pro Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine