Jenn-Air FREESTANDING OUTDOOR GRILLS Installation Instructions Manual

Contents

Jenn-Air FREESTANDING OUTDOOR GRILLS Installation Instructions Manual Manual pdf 13 page image

13GAS CONVERSIONSTools and Parts for Gas ConversionGather the required tools and parts before starting installation.Read and follow the instructions provided with any tools listedhere.Tools neededParts supplied■ Natural gas orificesParts needed■ Natural gas conversion kit Part Number 710-0003. See“Assistance” section to order. The conversion kit includes:■ Natural gas regulator 4" W.C. (marked “Natural GasRegulator”)■ 10 ft (3.0 m) Natural gas hose with quick connector■ 5.9" (150 mm) Natural gas regulator hose■ 6 mm nut driver■ 6 mm wrench■ Allen keyIMPORTANT: Gas conversions must be done by a qualifiedinstaller. Before proceeding with conversion, shut off the gassupply to the appliance prior to disconnecting the electricalpower.Conversion from LP Gas to Natural GasInstallation of the regulator1. Turn off the main gas supply valve.2. Unplug grill or disconnect power.3. Disconnect 20 lb LP gas fuel tank (if present).4. Turn off all burner control valves.5. Remove the 20 lb LP gas fuel tank (if present) from the grillcart.6. Use an adjustable wrench to remove the LP regulator fromthe manifold.7. Use an adjustable wrench to install the Natural gas regulatorhose to the manifold and secure. Attach the Natural gasregulator to the side panel inside the grill cart with the twoscrews that are preassembled on the regulator.Make Gas Connection1. A combination of pipe fittings must be used to connect thegrill to the existing gas line.■ The 10 ft (3.0 m) PVC flexible gas supply hose design-certified by CSA must be used.■ Pipe-joint compounds suitable for use with Natural gasmust be used. Do not use Teflon®† tape.■ There must be a certified manual shutoff valve in the gassupply line near the grill for easy access.2. Connect the brass connector on one end of the 10 ft (3.0 m)PVC flexible gas supply hose to the Natural gas pressureregulator.■ Phillips screwdriver■ Pipe wrench■ Adjustable wrench■ 6 mm socket and wrenchor 6 mm nut driver■ Thin flat-blade screwdriver■ Pliers■ Pipe thread sealantcertified for LP gasWARNINGExplosion HazardUse a new CSA International approved “outdoor”gas supply line.Securely tighten all gas connections.Failure to do so can result in death, explosion, or fire.†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.