Jenn-Air JDRP548W Installation Instructions Manual

Also see for JDRP548W: Installation instructions

Contents

11WARNINGExcessive Weight HazardUse two or more people to move and install range.Failure to do so can result in back or other injury.1. Remove shipping materials, tape, and film from range.Keep shipping pallet under range. Remove oven racks,grates, and parts package from inside oven.2. Remove kick plate.Your range will either have the kick plate already installed(follow Option 1) or packaged on top of the unit (followOption 2).A. Kick plateB. Remove these screws.ABc. Lift up on kick plate to release plate fromshoulder screws.d. Lay kick plate to the side to avoid scratchingthe stainless steel.Option 2a. Remove kick plate from top of range and grate pack.Unpack the RangeIn packagingPackaging removedAA. Kick plateAA. Kick plateb. Lay kick plate to the side to avoid scratchingthe stainless steel.c. Remove screws from range.A. Remove these screws.Option 1a. Remove foam between door and kick plate.b. Remove screws from kick plate.INSTALLATION INSTRUCTIONS3. For 48" (121.9 cm) models only, rotate centersupport counterclockwise off the pallet until it stops.NOTE: This support is used only for shipping and is notneeded for installation.4. Lay a piece of cardboard from side packaging on the floorbehind range. Using 2 or more people, firmly grasp eachside of range. Lift range up about 3" (8.0 cm) and moveit back until range is off shipping pallet. Set range oncardboard to avoid damaging floor.