Jenn-Air JDRP548W Installation Instructions Manual

Also see for JDRP548W: Installation instructions

Contents

13Electrical Connection — U.S.A. Only30" (76.2 cm) and 36" (91.4 cm) Models 48" (121.9 cm) ModelsWARNINGElectrical Shock HazardDisconnect power before servicing.Use a new 40 amp power supply cord.Plug into a grounded outlet.Failure to follow these instructions can result in death,fire, or electrical shock.WARNINGElectrical Shock HazardDisconnect power before servicing.Use a new 50 amp power supply cord.Plug into a grounded outlet.Failure to follow these instructions can result in death,fire, or electrical shock.1. Disconnect power.2. Remove the terminal block cover screws and disengagemounting tabs to remove terminal block cover from backof range.3. Add power supply cord strain relief.■ Assemble a UL listed strain relief in the opening.ABCA. Phillips head screwsB. Terminal block coverC. 2 mounting tabs at bottomAA. UL listed strain relief■ Tighten strain-relief screw against the powersupply cord.4. Complete installation following instructions for your typeof electrical connection:4-wire (recommended)3-wire (if 4-wire is not available)Electrical Connection OptionsIf your home has: And you will beconnecting to:Go to section:4-wire receptacle(NEMA type 14-50R)A UL listed,250-voltminimum,40- or 50-amp,range powersupply cord4-wire connection:power supply cord3-wire receptacle(NEMA type 10-50R)A UL listed,250-voltminimum,40- or 50-amp,range powersupply cord3-wire connection:power supply cord