Jenn-Air JER8550 User Manual

Contents

Jenn-Air JER8550 User Manual Manual pdf 8 page image

Controls at a GlanceOven Temperature Adjustment Option Clock Controlled OvenIfyouthinktheovenshouldbehotterorcooler, youcanadjust Cooking Beep Optionsit yourself. To decide how much to change the thermostat, setthe oven temperature 25°F higher or lower thanthe tempera- • Option 1 (default option): Four beeps at the end ofture in your recipe, then bake. The results of the "test" should cooking, then, one beep every 30 seconds for the next fivegive you an idea of how much to adjust the thermostat, minutes or until the Stop/Clear pad is pressed.To adjust the thermostat: • Option 2: Four beeps at the end of cooking, then, onebeep every minute for the next 12hours or until the Stop/1. Press the Bake pad. Clear pad is pressed.2. Enter 550° by pressing the number pads "5, 5, 0". • Option 3: Four beeps at the end of cooking, then, no3. Press and hold the Bake pad for several seconds until 0° other beeps.appears in the display.4. Press any number pad to change the temperature. Each Setting Clock Controlled Oven Cooking Beepstime a pad is pressed, the temperature changes by 5°F. 1. Press Cook Time and Stop/Clear pads at the same timeI_ Press repeatedly to reach +35°F. Continue pressing to and hold for three seconds.reduce the temperature up to -35°E • A single beep will sound.• Display will show the indicator word COOK and the5. When you have made the adjustment, press the Stop/Clear current option.pad and the time of day will reappear in the display. Theoven will now bake at the adjusted temperature. 2. Press the appropriate number pad (1, 2, or 3) to select theIt is not necessary to readjust the oven temperature if there is option you wish. The current time of day will reappear inthe display after four seconds.a power interruption. This adjustment will not affect broil orclean temperatures.Automatic Oven Turn Off OptionTimer Beep Options The oven will automatically turn off after 12 hours, if you• Optionl: Onelongbeepattheendofthetimeroperation, accidentaIIyleave it on. You can deactivate this feature, ifthen, one short beep every 30 seconds for the next five desired.minutes or until the Stop/Clear pad is pressed. To Eliminate 12 Hour Turn Off• Option 2: One long beep at the end of the timer opera- 1. Press the Clock pad and hold for three seconds or untiltion, then, one short beep every minute for the next 12 "12"appearsinthedisplay. TheindicatorwordTIMEwillhours or until the Stop/Clear pad is pressed, flash in the display.• Option 3 (defualt option): One beep at the end of the 2. Press any number pad until 8888 appears in the display.timer operation, then, no other beeps. Current time of day will reappear in the display after fourseconds.Setting the Timer Beeps To restore: Press the Clock pad andhold for three seconds1. PresstheTimerandStop/Clearpadsatthesametimeand oruntil8888appears.Press"l"numberpad. "12" will appealhold for three seconds, briefly in the display followed by the current time of day.• A single beep will sound.• Display will show the indicator word TIMERand the current option.2. Press the appropriate number pad (1, 2, or 3) to select theoption you wish. The current time of day will reappear inthe display after four seconds.