Jenn-Air JES8750AAB Service Manual

Also see for Jenn Air Range Stove Oven JES8750AAB: User guide

Testing Procedures! WARNINGTo avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unlesstesting requires power.©2005 Maytag Services 16025927 15Oven Control Testing ProceduresChanging factory set default options: 1. PressSetup Options and the desired pad simultaneously (see table).2. PressAutoset to change the option.3. Press any pad exceptCancel to accept the change.4. PressCancel to cancel the operation.Control Component Test Procedure ResultsEOC II Oven temperatureadjustmentPressBake pad and enter 550° F (288° C). Pressand holdBake pad until TEMP ADJ displays.PressAutoset pad to adjust oven in 5° F (-15° C)increments, from -35° F (-37° C) to 35° F (2° C).While increasing or decreasing oventemperature, this does not affect self-cleaning temperature.EOC II End-of-TimerReminder beepsPressSetup Options and the applicable timerpad (Timer 1 orTimer 2) simultaneously.Selects the number of beeps emittedwhen a timed bake cycle ends.EOC II Control Lock PressSetup Options and theControl Lock pad(also the1 pad) simultaneously.PressAutoset to select option (enableor disable). The timer, clock and ovenlight are operational.EOC II Twelve Hour off/Sabbath modePressSetup Options and the12 Hour Off pad(also the2 pad) simultaneously.Disables the normal 12-hour shutoff,allowing the oven to operate indefinitely.EOC II Sound Level(Beeper Volume)PressSetup Options and theSound Level pad(also the3 pad) simultaneously.PressAutoset to select setting (I lowestthrough IIIIIIII 8 highest).EOC II 24-Hour Clock PressSetup Options and the12/24 Hour Clockpad (also the4 pad) simultaneously.PressAutoset to select option (12-hourtime or 24-hour time).EOC II Scroll Speed PressSetup Options and theScroll Speed pad(also the5 pad) simultaneously.PressAutoset to set speed of displayedmessages (slow, medium, fast).EOC II End-of-Cook-TimeSignalPressSetup Options andCook Time Beepspads (also the6 pad) simultaneously.PressAutoset to set the number ofbeeps emitted at the end of a "clock-controlled" cook cycle.EOC II Temperature Display PressSetup Options and theTemp C/F pad(also the7 pad) simultaneously.PressAutoset to select option(°F or °C).EOC II Language Display PressSetup Options and theLanguage pad(also the8 pad) simultaneously.PressAutoset to select option(English, French or Spanish).EOC II Factory Default PressSetup Options and theDefault pad (alsothe9 pad) simultaneously.PressAutoset to reset clock to factorysettings.EOC II Clock Display PressSetup Options and theDisplay On/Off pad(also theClock pad) simultaneously.PressAutoset to select clock display (onor off).EOC II Test Access Press and holdCancel andBroil pads for 3seconds at power up or within 5 minutes of powerup mode. See "Quick Test Mode."Allows access to each function for testingpurposes.