Jenn-Air JES8750AAB Service Manual

Also see for Jenn Air Range Stove Oven JES8750AAB: User guide

©2005 Maytag Services 16025927 23To avoid risk of electrical shock, personal injury ordeath; disconnect power to unit before servicing.Disassembly ProceduresConvectionFanHi-LimitThermostatDoor HingeReceiverOvenLightSwitchDoorLatchOven Door Latch1. Remove control panel, see "Control Panel"procedure.2. Remove screws securing door latch to the front of theoven cavity outer shell.3. Remove screws securing door light switch to doorlatch assembly.4. Label and disconnect wire terminals from latchassembly.5. Reverse procedure to reinstall door latch assembly.Oven Door RemovalWARNING!To avoid risk of personal injury or property damage,do not lift oven door by the handle.1. Open oven door and grasp door on both sides.2. Lift up and off the hinge receivers.3. Reverse procedure to reinstall oven door.Oven Door Hinge1. Remove power from unit.2. Remove unit from installation position, see“Removing and Replacing Range” procedure.3. Remove oven door, see "Oven Door Removal"procedure.4. Remove front side trim, see "Front Side Trim"procedure.5. Remove the top and bottom screws securing hingereceiver to the front frame.6. Remove hinge receiver from oven chassis.7. Reverse procedure to reinstall oven door hinge.Door Disassembly1. Remove oven door, see "Oven Door Removal"procedure.2. Place door on a protected surface.3. Remove screws securing bottom trim to oven door.4. Slide outer oven door glass and trim towards thebottom of the oven door and remove.5. Detach right and left trim pieces for outer door glass.NOTE: Proceed with the following steps for door handleand inner door disassembly.6. Remove screws securing top door handle trim tooven door chassis.7. Remove screws securing door handle brackets toinner door panel.8. Lift upward on the lower side of the door handle torelease side alignment screws and rotate towards thetop of the oven door to release and remove.9. Remove screws securing door handle to door handlebrackets.