Jenn-Air JFD2589KEP Use & Care Manual

Also see for JFD2589KEP: Use & care guide

8INSTALLATION5. Slide brass nut over sleeve and screwnut into inlet port.Place adjustable wrench on nut(1) attached to plastic waterlineand maintain position.Using second adjustable wrenchturn the lower nut (2)counterclockwise and fullytighten while holding the uppernut in place.Important: Do not over-tighten.Cross threading may occur.6. Pull on tubing to confirmconnection is secure.Connect tubing to framewith water tubing clamp (C)and turn on water supply.Check for leaks and correctif necessary. Continue toobserve the water supplyconnection for two to threehours prior to moving therefrigerator to its permanentlocation.7. Monitor water connection for 24 hours.Correct leaks, if necessary.C12