Tip Over HazardA child or adult can tip the range and be killed.Connect anti-tip bracket to wall behind range.Reconnect the anti-tip bracket, if the range is moved.Failure to follow these instructions can result in death or serious burns to children and adults.INSTALLATIONREQUIREMENTSGather the required tools and parts before starting installation.Read and follow the instructions provided with any tools listedhere.Tools needed• Tape measure• #2 Phillips screwdriver• 1/8"x 41¼'' flat-bladescrewdriver• Level• Drill• Wrench or pliers• Pipe wrench• Adjustable wrench or8/8"wrench• 3/8"drive ratchet• 1/8"drill bit• 18/16"combination wrench• 1/4",3/8",8/16"nut drivers• 3/16"carbide tip masonry bit• Marker or pencil• Pipe-joint compoundresistant to LP gas• Noncorrosive leak-detectionsolution• Tubing cutterFor LP/Natural GasConversions• T15 Torx ®tscrewdriver• 7/8"socket• Adjustable wrench• 1/2"deep-well socket• 7 mm nut driver• Masking tapeParts suppliedCheck that all parts are included.• Anti-tip bracket kit• Burner heads and caps• Griddle drip tray (on griddle models)• LP orifice package (W10323791)• Conversion label (8114P522-60)NOTE: The cooktop is manufactured for use with Natural gas.To convert to LP gas, see the "Gas Conversions" section.Parts neededAll models must be installed with a backguard if installing at zeroclearance to a combustible backwall. See "Cabinet Dimensions"in the "Location Requirements" section for installationrequirements.• 30" (76.2 cm) Adjustable BackguardOrder Part Number 8285148• 36" (91.4 cm) Adjustable BackguardOrder Part Number 8284756• 48" (121.9 cm) Adjustable BackguardOrder Part Number 8284755• 22" (55.9 cm) Backguard with Shelf for 30" (76.2 cm)RangesOrder Part Number W10225950• 22" (55.9 cm) Backguard with Shelf for 36" (91.4 cm)RangesOrder Part Number W10225949• 22" (55.9 cm) Backguard with Shelf for 48" (121.9 cm)RangesOrder Part Number W10225948A. Anti-tip bracketB. #8-18 x 111Phillips head screws (4)NOTE: Anti-tip bracket must be securely mounted tosubfloor. Thickness of flooring may require longer screws toanchor bracket to subfloor. Longer screws are available fromyour local hardware store. See "Install Anti-Tip Bracket"section.• Burner gratesGas pressure regulatorTo order, see the "Assistance or Service" section of the Useand Care Guide.Check local codes and consult gas supplier. Check existing gassupply and electrical supply. See "Electrical Requirements" and"Gas Supply Requirements" sections.It is recommended that all electrical connections be made by alicensed, qualified electrical installer.High Altitude ConversionTo convert the range for elevations above 6,560 ft (1999.5 m),order a High Altitude Conversion Kit.• Part Number W10324363 - LP high altitude• Part Number W10324365 - Natural gas high altitudeTo order, see the "Assistance or Service" section of the Use andCare Guide.I"®TORX is a registered trademark of Acument Intellectual Properties, LLC.