Jenn-Air JMW2427WB00 Use & Care Manual

Also see for JMW2327: Use & care guide Use & care guide Use & care guide Use and care guide Use & care guide

10. Select the doneness level: medium rare, medium or well-done, or set the probe temperature if available.NOTE: Foods such as beef, poultry and pork should beremoved from the oven when the probe notifies you, covered,and allowed to stand for 10-15 minutes. The 10-15 minuterest allows the temperature of the food to increase to yourselected doneness level.11. To set a desired cooking temperature, select the Oven Tempoption and enter the desired temperature. The temperaturemust be set between 170°F (77°C) and 550°F (288°C).12. (Optional) To set a delayed start, select Delay Start and setdesired time. See "Delay Start" for additional information.13. Press START to begin cooking.14. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER,on double models) to turn off the oven.Food Poisoning HazardDo not let food sit in oven more than one hour beforeor after cooking.Doing so can result in food poisoning or sickness.Delay Start allows the oven(s) to be set to turn on at a certaintime of day and cook for a set length of time. Delay Start shouldnot be used for food such as breads and cakes because theymay not bake properly.Delay Start is available in any cycle that has a Delay Start button.You may need to select Set Cook Timer to access the Delay Startoption.To Set a Delay Start:1. From any cycle with the Delay Start button available, pressthe quickset pad next to Delay Start.2. Delay Start can be set to use with the Cook Timer, while usingthe probe, or as a delayed start with no Cook Timer.Delay with Cook Timer:1. If Delay with Timer is chosen, use the quickset pads to selectthe desired start time. The end time should equal the starttime plus the Cook Timer.2. The oven will automatically keep the food warm after endingthe cycle at the chosen end time.3. Press START.Delay with Probe:Burn HazardUse an oven mitt to remove temperature probe.Do not touch broil element.Failure to follow these instructions can result in burns.1. If Delay with Probe is chosen, use the quickset pads to selectthe desired start time. Because the probe controls the endtime, an end time will not be displayed.2. The oven will automatically keep the food warm when theprobe reaches the target temperature.3. Press START.Delay No Timer:1. If Delay No Timer is chosen, use the quickset pads to selectthe desired start time.2. When Delay No Timer is set, the oven will automatically turnoff after cooking for 12 hours.3. Press START.The Button Lock allows all the buttons to be locked.To Activate the Button Lock:1. From the Select Mode menu, touch the MORE button untilButton Lock appears. Press the quickset pad next to it.2. While the buttons are locked, there is a "locked" icon on theidle screen.To Deactivate the Button Lock:1. If any button was pressed, an unlock message will appear onthe screen.2. To unlock, press and hold the START button for 3 seconds.21