Jenn-Air PRO-STYLE SEALED GAS COOKTOP Use & Care Manual

Contents

9Surface burner fails to light. • Check to be sure unit is properly connected to power supply.• Check or re-set circuit breaker. Check or replace fuse.• Check power supply.• Check to be sure burner is correctly rated for your kind of gas.• Check to be sure burner ports or ignition ports are not clogged.• Check to be sure ignitor is dry and clicking. Burner will not light if ignitor is damaged,soiled or wet. If ignitor doesn’t click, turn control knob OFF.• Check to be sure burner cap is correctly seated on the burner base.Surface burner flame lifts • Check to be sure a pan is sitting on the grate above.off ports. • Contact an authorized Jenn-Air servicer.The flame is uneven. • Burner ports may be clogged.• Flame may need to be adjusted. Contact an authorized Jenn-Air servicer.Surface burner flame is • Some yellow tips on the flame are acceptable when using LP gas.yellow in color. • Contact an authorized Jenn-Air servicer.PROBLEM SOLUTIONT ROUBLESHOOTING