The Preset Foods function will display prompts and allow you tomake selections to assist you in preparing a variety of foods.You can choose from 11 categories of food: Meat, Poultry, Fish/Shellfish, Potatoes, Vegetables, Rice/Grain, Pasta, Eggs, Pizza/Pie, Desserts, or Bread/Cakes. Once you select a food category,you will be prompted to make additional selections.IMPORTANT: At the end of the cooking cycle, make sure toempty the water container and return it to its compartment beforeclosing the oven door.To Use:IMPORTANT: For best results, rotate food from front to backhalfway through cooking.Use the on-screen prompts or the following instructions toprepare foods using the Preset Foods function.1. Open the oven door and place food in the oven.(Optional): If you are using the temperature probe, make surethat it is properly inserted into the food, and plug in thetemperature probe. The oven will sense that the temperatureprobe is connected and display the appropriate prompts.2. Press ON/HOME.3. "Preset Foods" is the default selection. Press OK to confirm.4. Press the up or down buttons until the desired food categoryis selected on the display, then press OK to confirm.5. Press the up or down buttons until the desired food type isselected on the display, then press OK to confirm.6. Follow the on-screen instructions concerning the watercontainer and other accessories.7. Press the up or down buttons to select which setting to edit,then press OK to confirm.8. Press the up or down buttons until the display shows whatyou want, then press OK to confirm.9. Press the up or down buttons until the Temperature setting isselected on the display, then press OK to confirm.10. Press the up or down buttons until the desired temperature isdisplayed, then press OK to confirm.11. Press the up or down buttons until the Cook Time setting isselected on the display, then press OK to confirm.12. Press the up or down buttons until the desired cook time isdisplayed, then press OK to confirm.The maximum Cook Time depends on the type of food beingcooked.13. Press START to begin the cooking cycle.14. To change temperature or cook time after the cookingprocess has been started, see the "Changing CookingFunction Settings" section.15. When the Cook Time is complete, an alert will sound and amessage will appear on the display prompting to you to addmore time to the cycle if desired.