Jensen VX7014 Operation Manual

Also see for VX7014: Installation & quick start guide Operating instructions

15VX7014System Settings AdjustmentTo access and adjust system settings:1. Touch the Settings ( ) icon on the Main Menu screen to enter the SETTINGSMENU. Sub-menus where adjustments can be made will be highlighted.Volume Adjustment / Turn On VolumeTo increase or decrease the volume level, rotate the rotary encoder knob. Theunit’s front panel screen will display the volume level for 2 seconds. Thevolume level ranges from 0 to 50. To set the Turn-On volume, press and holdthe rotary encoder knob 1 second while the green volume bar is displayedafter setting the desired volume level. You will hear 2 beeps to confirm thenew Turn-On volume level.Audible Beep ConfirmationAn audible beep tone confirms each function selection. The beep tone can bedisabled through the Setup menu.Selecting the SourceIf you are in navigation mode, and short press the rotary encoder, the unit willgo to the Main Source Menu. If you press the RE again, you will be taken to thecurrently selected audio source.Equalizer ControlsEqualizer (EQ): Adjustment can be made after entering one of the audio/videosources (Disc, Radio, USB, AV-IN or SXM.Touch the equalizer (EQ) icon to view the equalizer control screen to select flatsetting, custom user setting, make adjustments to the audio balance and faderlevels or to turn the loudness option ON or OFF. Touch SRC to return to thecurrent source.