Jensen VX7014 Operation Manual

Also see for VX7014: Installation & quick start guide Operating instructions

44VX70143. Touch the preset number in which you would like to store the currentstation. The station frequency is displayed at the top of the menu. The presetnumber will appear highlighted. The station frequency will be stored in thehighlighted preset. The station will be displayed Tuner TFT LCD screen. Stationcan also be stored by touching and holding the preset icon to store the stationcurrently tuned as a preset.Recalling a Station1. Select a preset band (if needed).2. Touch an on-screen preset icons (P1 through P6) to select the correspondingstored station.Preset Station ScreenAuto Store (AS)To select six strong stations and store them in the current band. This feature is mostuseful when travelling in an area where you are not familiar with the local stations.1. Select a band (if needed).2. Touch the AS icon to activate the Auto Store function. FM Band 1 will be filledif enough stations are detected. The AM Bands function in a similar manner.As new stations are found they will replace stations already stored in thatband.Note: If stations have already been set as favorites, activating the Auto-Store feature will erase those stations and enter the new strong stations.Local (LOC) / Distance (DX) SettingsWhen the Local function is on, only radio stations with a strong radio signal areplayed. To activate the Local function in the AM/FM tuner mode, touch "More" onthe Tuner user interface (UI) screen. The Local/Distance icon is displyed. TouchLocal / Distance to turn the function ON or OFF. When the Local or Distancefunction is active, the Local / Distance text in the UI is displayed.