Jensen VX7014 Operation Manual

Also see for VX7014: Installation & quick start guide Operating instructions

61VX70148. Touch the “Pair” icon on the unit’s Bluetooth user interface screen.9. A prompt to pair should appear on your mobile phone. Accept the requestand initiate the process.NOTE: Some mobile phones require a “pass key” or pairing code toconnect. If your phone requires a pass key or pairing code, you will needto enter this number. The default pairing code for the VX7014 is"5309".10. A prompt to enter a PIN number or passkey for the unit should appear. Thedefault passkey for the unit is “5309”.11. At this point a prompt stating pairing successful should appear. Anotherprompt should appear asking connect to the unit, Yes or NO. Touch Yes. Themobile phone and the unit should connect. The mobile phone should displaya message similar to “Device Connected” and the mobile phone and the unitare now connected. VX7014 will appear on the mobile phone list of devices.Managing Incoming CallsWhen connected to a Bluetooth mobile phone, the unit will mute audio output,pause CD play, and change to the Bluetooth screen below when a call is received.The incoming phone number or assigned name for that number will appear onthe screen. An audible tone will sound from the unit and a graphic display willappear on the front panel.Bluetooth Incoming Call Screen1. icon: Touch to answer an incoming call.2. icon: Touch to end an incoming call.