Jet JWBS-24 Operating Instructions Manual

Contents

Jet JWBS-24 Operating Instructions Manual Manual pdf 5 page image

7Fig 6Tighten the placed sawbladesufficiently.Follow the scale on the back of themachine.7.3 Blade guide adjustmentBlade guide adjustment shall never beperformed when the machine isrunning.Position the guide assembly forward/backward so that the teeth keep adistance of appr. 2mm to the guiderollers.Secure the back guide roller so thatthe distance to the saw blade is 1mm.(Fig 7)Fig 7Set the lateral guide rollers so thatthey contact the sawblade lightly.The sawblade may not be pushed outof place.Upper blade guide (Fig 8):Fig 8Lower blade guide (Fig 9 and 10):Fig 9Fig 10Test run:Press the break release button (L, Fig5) and turn the wheels by hand andinspect the adjustments made.Start the machine with care.Workpiece setup:Bring the upper blade guide to adistance of approx 5mm to theworkpiece (Fig 11).Fig 11For your own safety, always set thesaw guide as close to the workpieceas possible.7.4 Table tiltingLoosen the lever (S, Fig 12).Rotate the handwheel (Q) clockwise totilt table up to 45°.Rotate the handwheel counterclockwise to tilt the table to the left upto 10°.NOTE: If you tilt the table to the left,you must first swing open the stopplate (R).Fig 127.5 90° Table Stop adjustmentUse a square to inspect (Fig 13).Fig 13Adjust the 90° table stop (T, Fig 14)for the table to be square to thesawblade.