English 5.906-590.0 Rev. 01 (05/17) 13The basic unit is characterized by good accessibility andease of servicing. It has a self-supporting frame made ofplastic.Steam boiler, pumps and valves are mounted on a basesupport made of stainless steel. The base support can betilted out of the appliance towards the bottom so that thesteam group becomes easily accessible.The waste water tank is accommodated on the right sideof the appliance. It can be removed from the appliance.A door with a stainless steel cover protects the waste wa-ter tank. The door is fastened to the appliance by means ofan exchangeable hinge band.The rear and left appliance covers are made of stainlesssteel and can be removed. The appliance covers have acircular seal to retain ingressing water.Fresh water and detergent tank are located at the front ofthe appliance.The tanks can be removed from the appliance individually.The push handle can be dismounted.Accessory holder, accessory support and cable hooks canbe replaced.The front plate of the control unit is screwed together withthe appliance and can be dismounted.An accessory carrier is inserted underneath the upper ap-pliance cover. The cover of the power electronics and thefan are accessible underneath the accessory carrier.The accessory outlet can be dismounted and containsconnections for: Steam Control SuctionThe chassis and suspension consists of two rear wheelson an axle and two steering rollers with parking brake.1 Handle2 Faceplate fresh water tank3 Fresh water tank cover4 Carry handle5 Cover fresh water tank6 Washer7 Elbow8 Suction hose9 Water filter with weight10 Float1 Screws030 Function040 Service activitiesABAF Uninstall/install cover fresh water tank