English 5.906-590.0 Rev. 01 (05/17) 611 Knob2 Screws3 Operating panel4 Screws5 Electric connectors6 Program selection switch Remove the knob. Unscrew the screws on the control panel. Remove the control panel. Unscrew the screws on the programme selector switch. Separate the electric connectors. Remove the programme selector switch.Installation informationEnsure the correct seating of the seal during installation. ABGL Uninstall / install appliance cover on the left side1 Screws2 Electric connectors3 Pressure switch4 Nut Separate the electric connectors. Loosen the nut. Unscrew the screws. Remove the pressure switch. ABGL Uninstall / install appliance cover on the left side1 Screws2 Cover Unscrew the screws. Remove cover.AHPW Uninstall / install programme selector switchAHDS Uninstall / install pressure switchAHRF Uninstall/install reed contact fresh water tank
