KEB Combivert F5 Instruction Manual

Also see for COMBIVERT F5: INSTALLATION GUIDELINE Installation manual Instruction manual Instruction manual Installation manual

GB - 4Preface1. Introduction1.1 PrefaceWe welcome you as a customer of the Karl E. Brinkmann GmbH and congratulate you to the aquisition of thisproduct. You have chosen a product on highest technical standard.This manual as well as the specified hardware and software are developments of the Karl E. Brinkmann GmbH.Errors and ommissions excepted! The Karl E. Brinkmann GmbH have prepared the documentation, hardwareand software to the best of their knowledge, however, no guarantee is given that the specifications will providethe efficiency aimed at by the user. The Karl E. Brinkmann GmbH reserves the right to change the specificationswithout prior notification or further obligation. All rights reserved. The safety and warning instructions specified inthis manual do not lay claim on completeness.The pictograms used in this manual mean:DangerWarningCautionAttentionobserve atall costsInformationHelpTip1.2 Product descriptionThis instruction manual describes the frequency inverter series KEB COMBIVERT F5 for lift drives. This seriesconvinces through the special adaption of the operation to the requirements of lift drives. The lift functions areavailable only in connection with the lift operator (part number 00.F5.060-200C software version 2.2).The power range of KEB COMBIVERT F5 for lift drives ranges from• 2.2…45 kW / 230 V class• 2.2…630 kW / 400 V classThe designs are available in following variants:• heat sink for control cabinet installation (standard)• heat sink for control cabinet cutout (through-mount version)• without heat sink for customer-specific cooling systems (Flat-Rear)