47Copyright © 2000 - 2005 KEMP Technologies, Inc. All Rights Reserved.Farm side: eth1IP Address________________________________________________________________________Netmask________________________________________________________________________Shared IP address________________________________________________________________________Hostname________________________________________________________________________Name Servers(Space separated list)________________________________________________________________________Search Domains(Space separated list)________________________________________________________________________Default Gateway(IP Address)III. Command Line InterfaceReference GuideThe command interface syntax is loosely based on the industry standard syntax as used by other LoadBalancer manufacturers.The command interface has a line based, hierarchical command set. Changes made to the configuration areonly performed when returning to the top level.Hint: A port can either be specified as a numeric value or as a symbolic name. The following names arerecognized:DNS 53FTP 21HTTP 80IMAP4 143LDAP 389POP2 109POP3 110SMTP 25SNMP 161SSL 443TELNET 23TFTP 691. Top level commandsAt the top level the following commands may be specified.1.1. AdaptiveThis command switches the input to the adaptive parameters command set.1.2. Delete This command will delete the specified VIP.1.3. Disable_rs
