KEP SUPERtrol II Manual
Also see for SUPERtrol II: Startup guide
                                                                                                                               | |
Contents
| 
SUPERtrol II Flow Computer10410. Flow Computer Setup SoftwareThe SUPERtrol II setup program provides for configuring, monitoring and controlling aSUPERtrol II unit.Sample applications are stored in disk files. The setup program calls these Templates. Youcan store the setup from the program’s memory to either the SUPERtrol II (Downloadingthe file) or to a disk file (Saving the file) for later usage. Similarly you can load the setupin program memory from either a disk file (Opening a file) or from the SUPERtrol II unit(Uploading a file).The program can monitor outputs from the unit while it is running.The program can reset alarms and totalizers.The peak demand may be reset when the option is supplied.For assistance there are mini-helps at the bottom of each screen in the program. There isalso context sensitive help available for each screen accessible by pressing the F1 key.10.1 System Requirements:IBM PC or compatible with 386 or higher class microprocessor4 MB RAM3 MB free disk spaceVGA or higher color monitor at 640 x 480Microsoft® Windows™ 3.1 or 3.11 or Windows 95/98™ or higherCommunication Port - RS-232RS-232 Cable (customer supplied)10.2 Cable and Wiring Requirements:The serial communication port on your PC is either a 25 pin or 9 pin connector. No cablingis supplied with the setup software. A cable must be purchased separately or made bythe user. It is recommended to purchase a serial cable which matches the availablecommunication port on you PC and a 9 pin male connection for the SUPERtrol II serial port.10.3 Installation for Windows™ 3.1 or 3.11The Setup Software includes an installation program which copies the software to your harddrive.Insert Setup Disk 1 in a floppy drive.In the Program Manager, click File, and then select Run.NOTE: For Windows 95™ Click the Start button, select Run and proceed asfollows:Type the floppy drive letter followed by a colon (:) and a backslash (\), and the word setup.For Example:a:\setupFollow the instructions on your screen.10.4 Using the Flow Computer Setup SoftwareThe setup software window consists of several menu “Tabs”. Each tab is organized intogroups containing various configuration and/or monitoring functions. To view the tabwindows, simply click on the tab. The previous tab window will be hidden as the new tabwindow is brought to the foreground.Caution: It is required that the SUPERtrol II unit which is being configured be kept in theoperating mode while using the setup diskette. If not, uncertainty exists as towhat information will be retained when the session is concluded. |
Related manuals for KEP SUPERtrol II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine