KEP SUPERtrol II Manual
Also see for SUPERtrol II: Startup guide
                                                                                                                               | |
Contents
| 
SUPERtrol II Flow Computer40DISPLAY6.5DISPLAYSelect the variable that are to be displayed in the "HOME position"during normal operation. Each variable can be assigned to line 1(L1), line 2 (L2) or NO (removed from scroll list).Note:• To initiate the scroll list press the SCROLL key. The list willbe displayed in groups of two, each group is displayed forapproximately 3 to 4 seconds.• Any alarm messages will be displayed periodically,alternating throughout the scroll list.Selection (with Prompt):CHANGE? YES, NOADD TO LIST? L1, L2, NOVariable Selection:HEAT FLOW, MASS FLOW, VOLUME FLOW, STD.VOLUME FLOW, TEMP.1, TEMP.2, DELTA T, PRESSURE,DENSITY, SPEC. ENTHALPY, TIME, DATE, HEAT TOTAL,HEAT GRAND TOTAL, MASS TOTAL, MASS GRANDTOTAL, STD VOLUME TOTAL, STD.V. GRAND TOTAL,VOLUME TOTAL, VOL. GRAND TOTAL, PEAK DEMAND,DEMAND LAST HOUR, PEAK DEMAND TIME, PEAKDEMAND DATENote: Variable selection will vary depending on Flow Equationselected and options supplied.Display: ADD TO LIST? L1HEAT FLOW?SCROLL LISTThe "display damping" constant is used to stabilize fluctuatingdisplays. The higher the constant, the less fluctuation will bedisplayed.Note: Relay response time is affected by the value entered fordisplay damping. The larger the display damping value,the slower the relay response time will be. This is intendedto prevent false triggering of the relays. Enter a displaydamping factor of zero (0) for fastest response time.Note:• Factory setting: 1Input:2 digits max; 0...99Display: CONSTANT? 1DISPLAY DAMPINGDISPLAYDAMPING |
Related manuals for KEP SUPERtrol II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine