KEP SUPERtrol II Manual
Also see for SUPERtrol II: Startup guide
                                                                                                                               | |
Contents
| 
SUPERtrol II Flow Computer316. PROGRAMMING6.1 Front Panel Operation Concept for Program ModeThe SUPERtrol II is fully programmable through the front panel. The instrument setupmenu structure is based on a number of topical submenu groups with one submenugroup for each instrument function. Each submenu contains all of the individual settingsassociated with that function. During the instrument setup, setup topics are shown onthe bottom line of the display while the detailed selection options are shown on the topline. A help menu is available for each menu item.Please review the following key usage summary before attempting to setup theinstrument.CAUTION: When the computations are paused the instrument outputs will go to asafe state which is the same as if the unit lost power. All calculations stop.Key Usage Summary:MENU KEYPressing the MENU key while in the "HOME" position will select the view setupparameters mode. Thereafter, the MENU key is used to "pop up" one menu level (i.e.return to the start of the submenu group). The unit will "pop up" one level for eachtime the MENU key is pressed until finally returning to the "HOME" position ofshowing the "scroll" display list.UP & DOWN ARROW KEYSUse the UP and DOWN arrow keys to navigate through the submenu groups. The upand down arrow keys are also used to view the next/previous selection in a selectionlist within a submenu cell. When entering text characters, the UP and DOWN arrowkeys are used to scroll through the available character sets for each individualcharacter location. Press the ENTER key to accept the character and advance to thenext character.HELP KEYOn-line help is available to assist the user during instrument setup. A quick help isprovided at each setup step. Press the HELP key to display a help message for thecurrent setup selection. This key is also used to enter decimals during numeric entrysequences.NUMERIC ENTRY KEYSThe keys labeled "0 - 9", "–", ".", CLEAR and ENTER are used to enter numericalvalues. A leading 0 will assume that you intend to enter a minus "–" sign.The standard numeric entry sequence is: CLEAR, "###", ENTER.Numeric entry valuesare bounded or clamped by minimum and maximum permitted values.CLEAR KEYThe CLEAR key is used to clear numeric values to "0".ENTER KEYThe ENTER key is used to accept the current value and advance to the next selection(Successfully terminate the current numeric entry sequence).PRINT50 –TIMECLEAR•MENUENTERHELPTEMP4PRE 13RATE2TOTAL1GRAND6SCROLL7PRE 28PRES9Menu KeyUp & DownArrow KeysHelp KeyNumeric EntryKeysClear KeyEnter Key |
Related manuals for KEP SUPERtrol II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine