KERN ALT Operating Instructions Manual

KERN ALT Operating Instructions Manual Manual pdf 39 page image

ALT-BA-defsi-0410 1078.1.1 Simple weighingOperation: Display:Ö Use the -key to turn on the balance.orÖ Use the -key to call up menu item “M0 Basic weighing“(chapter 8.1)Ö As soon as the weight display shows „0.000" your balance isready for weighing 0,0000Ö Put on items to be weighed; after stability time the measuringvalue is displayed. 19.6879 gÖ Pressing the -key you can switch to another weighing unit,e.g. ct (see Chapter 7.4.6 "P7 Weighing units") 98.4380 ctÖ To turn off the balance press the -key8.1.1.1 TareThe dead weight of any type of weighing container can be tared out by pressing abutton, so that subsequent weighing procedures show the net weight of the items tobe weighed.Operation: Display:Ö Use the -key to turn on the balance.Ö As soon as the weight display shows „0.0000" your balance isready for weighing 0.0000 gÖ Place items to be weighed on balance, the weighed value isdisplayed. 19.6879 gÖ Press the -key to start the taring process.The weight of the container is now saved internally. 0.0000 gÖ Place the item to be weighed into the tare container. Now readthe weight of the items to be weighed on the display. 53.2587 gThe taring process can be repeated any number of times, e.g. for severalcomponents for a mixture (add-on weighing).The limit is reached when the whole weighing range is exhausted.After removing the tare container the overall weight is displayed in the negative.