KERN ALT Operating Instructions Manual

KERN ALT Operating Instructions Manual Manual pdf 41 page image

ALT-BA-defsi-0410 1098.1.2 Parts countingBefore the balance can count parts, it must know the average part weight (i.e.reference). This is either entered manually or determined by weighing. Proceed byputting on a certain number of the parts to be counted. The balance determines thetotal weight and divides it by the number of parts (the so-called reference quantity).Counting is then carried out on the basis of the calculated average piece weight.As a rule:The higher the reference quantity the higher the counting accuracy.Display overview for parts counting operation:1. Number of all parts on the weighing plate2. Weighing-in aid coarse/fine (only displayed for active dispensing)3. Operating mode (status bar)4. Reference weight5. Weight of all parts on the weighing plate6. Tolerance marker (only displayed for active tolerance weighing)too lightrated valuetoo heavy7. Display for parts counting operationOperator IndicationÖ Call up operating mode “M1 Parts counting“(see chapter 8.1)Ö Press -keyÖ Use the cursor (►) to select your setting (01 – 07)Parts counting setupM1 01 Unit weight02 Recall sample03 Store sample04 Checkweighting05 Filling0607 RunStatistics5.0000 gONONOFF01 Unit weight – manual input of reference weightÖ Press the -key; the current menu item blinks.Use the arrow keys (see chapter 7.1) to enter thereference weight for a unit. Confirm with -key