KERN PCB Operating Manual
Also see for PCB: Operating instructionsOperating instructions
                                     | |
Contents
| 
PCB-BA-e-1315 319.4 Interface parametersData output is carried out via interface RS 232 C.GeneralThe previous condition for the data transfer between balance and a periphericaldevice (e.g. printer, PC ...) is that the appliances are set to the same interfaceparameters (e.g. baud rate, transfer mode ...).Data transfermode In weighing mode keep the PRINT key pressed until [Unit]appears. Press the MODE button several times until „Pr“ is displayed. Acknowledge using SET key, the current setting is displayed. Select the desired settings by pressing the MODE keyrE CR Data output via remote control commandsPr PC Data output using the PRINT keyAU PC Continuous data outputbA Pr Output on bar code printerAU Pr Autom. data output of stable weighing values Use the SET key to confirm selection. The balance returns toweighing mode. |
Related manuals for KERN PCB
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine