KERN PCB Operating Manual

Also see for PCB: Operating instructions Operating instructions

KERN PCB Operating Manual Manual pdf 9 page image

PCB-BA-e-1315 94 Basic Safety Precautions4.1 Pay attention to the instructions in the Operation ManualCarefully read this operation manual before setup andcommissioning, even if you are already familiar with KERNbalances.Versions in other languages are non-binding translations.The only binding version is the original document in German.4.2 Personnel trainingThe appliance may only be operated and maintained by trained personnel.5 Transportation & Storage5.1 Testing upon acceptanceWhen receiving the appliance, please check packaging immediately, and theappliance itself when unpacking for possible visible damage.5.2 PackagingKeep all parts of the original packaging in case you need to return the appliance.Only use original packaging for returning.Before sending, disconnect all connected cables and loose/movable parts.Attach possibly existing transport safeguards. Secure all parts, e.g. weighing plate,mains adapter etc., to prevent slipping and damage.6 Unpacking, Setup and Commissioning6.1 Installation Site, Location of UseThe balances are designed in a way that reliable weighing results are achieved incommon conditions of use.You will work accurately and fast, if you select the right location for your balance.Therefore, observe the following for the installation site:Place the balance on a firm, level surface;Avoid extreme heat as well as temperature fluctuation caused by installing next toa radiator or in the direct sunlight;Protect the balance against direct draughts due to open windows and doors;Avoid jarring during weighing;Protect the balance against high humidity, vapors and dust;Do not expose the device to extreme dampness for longer periods of time. Non-permitted condensation (condensation of air humidity on the appliance) mayoccur if a cold appliance is taken to a considerably warmer environment. In thiscase, acclimatize the disconnected appliance for ca. 2 hours at roomtemperature.Avoid static charge of goods to be weighed and weighing container.