KERN UFB Operating Instructions Manual

KERN UFB Operating Instructions Manual Manual pdf 23 page image

7.8 Automatic adding-upWith this function the individual weighing values are automatically added into thesummation memory when the balance is unloaded without pressing and edited,when an optional printer is connected.• Menu settings:„P1 COM“ Ö „MODE“ Ö „AUTO““, see chpt 8Indicator AUTO is displayed.Add up:Ö Place goods to be weighed A.After the standstill control sounds a signal tone. The weighing value is added tothe summation memory, followed by printing.Ö Remove the weighed good. More weighed goods can only be added when thedisplay ≤ zero.Ö Place goods to be weighed B.After the standstill control sounds a signal tone. The weighing value is added tothe summation memory, followed by printing. The number of weighings, followedby the total weight, will be shown for 2 sec.Ö Add more weighed goods as described before.Please note that the weighing system must be unloaded between the individualweighing procedures.Ö This process can be repeated until the capacity of the weighing system isexhausted.Display and delete the weighing data, as well as printout examples see chpt.7.7.UFB/UFN-BA-e-1011 23