KIDDY World Plus Instruction Manual

KIDDY World Plus Instruction Manual Manual pdf 14 page image

• Slide locking clip onto vehicle seat beltsapproximately 1/2 inch (1 cm) away from latch plate(Fig. 8).• Re-buckle vehicle seat belt.- Check to be sure vehicle lap belt is still correctlyrouted throughout entire belt path.- Check to see that the protection shield is snugglyadjusted onto child.- If not snuggly adjusted, readjusting the vehicle seatbelt tightening is required.- Unbuckle vehicle seat belt.- Hold vehicle seat belts together and remove lockingclip.- Readjust the lap belt.- Re-attach locking clip.- Buckle vehicle seat belt.- Test installation to see if protection shield is snugglyadjusted, if not snugly adjusted, repeat above stepsuntil protection shield is snugly adjusted.• Check that the protection shield is snuggly adjustedonto the child’s torso each time the child is securedinto the Todder car Seat.4.4 Vehicle seat back and headrest adjustment- Place the car seat on the vehicle seat,center the car seat in the seating positionso that car seat back contacts the vehicleseat back.- The backrest of your car seat should sitright up against the vehicle’s seat back.- If the vehicle headrest holds the car seatforward of the vehicle seat back, theheadrest should be removed (car seatforward of vehicle seat back) (Fig. 9).13Fig. 8Fig. 9