KIDDY World Plus Instruction Manual

KIDDY World Plus Instruction Manual Manual pdf 24 page image

5.2.2 Installation using the vehicle's lap and shoulderbelt and top tetherUse top tether whenever possible. Store top tether when not in use.Unbuckle protection shield buckle and store both LATCH connectors into thestorage pockets at the sides of the car seat (section 7.1).Selecting a vehicle seating location:Select a vehicle seating location equippedwith lap and shoulder belt and top tetheranchorage (if available) (Fig. 30).To locate a seating position with a top tetheranchor, check the vehicle owner's manualor contact your car dealer or manufacturer.NOTE: If a tether anchor is not available,store the tether assembly in the storagepocket in back of headrest. See section 7.2for information on how to store top tether.If the vehicle does not have a tether anchor, contact your vehicle dealer orvehicle manufacturer for tether anchor information.Center car seat on the vehicle seat between seat belt anchorages so that theback of the car seat contacts the vehicle seat back (Fig. 30).23• Snuggly adjust the vehicle belt and protection shield around your child.• The vehicle belt must stay snuggly adjusted around car seat when in use.• Secure the top tether to the vehicle whenever possible.• An unsecured connector or tether hook can injure occupants in a crash.Store LATCH connectors and tether hook when not in use.• Do not use the LATCH lower connectors when installing with a vehicleseat belt.DEATH or SERIOUS INJURY can occurWARNING!Fig. 30