KaVo OP 3D Vision Service Manual

Contents

KaVo OP 3D Vision Service Manual Manual pdf 31 page image

3-9Software Backup and Restore, Recovery, and Updates032-0358-EN Rev BSmartScan STUDIO Manager Status IndicatorsSmartScan STUDIO Manager displays three status indicators in the top, right-hand corner of the display. Move the mouse over the indicator to display moredetail about the status condition.Scanner - indicates status of the connectivity between the workstationrunning SmartScan STUDIO Manager and the scanner controller.Database -• The first indicator shows status of the communication betweenthe workstation running SmartScan STUDIO Manager and theSmartScan STUDIO Integration Services web service.• The second indicator shows status of the communicationbetween the workstation running SmartScan STUDIO Managerand the Image Root folder.If a status check fails, the status indicator changes to a red X.Refer to Installation Manual for more information on troubleshooting failedstatus indicator conditions. Contact Technical Support if problem is notcorrected or the error persists.Make a Backup Copy of the Software Package onto a Blank UFDNOTE: The touch screen interface is not active in this application. Attach a mouse or use keyboardcommands (tab to move between fields, up and down arrow keys to make selections in a field,space bar or Enter key to enter).1. Insert the bootable UFD into an available USB port on the scanner controller.2. Follow instructions in Boot the Scanner Controller from the Bootable UFD (page 3-5).3. After the scanner controller has booted from theUFD, the Installation Progress Monitor is displayed,followed by a window with the message: Verifyingpackages. Wait (about five minutes) until themessage Package verification passed isdisplayed and options on the window becomeactive. If package verification fails, obtain a newbootable UFD.4. Select MakeUFD from the Select Action drop-downmenu.5. Insert a blank UFD into an available USB port.6. Select the correct drive letter for the blank UFD from the UFD drop-down menu.7. Select Start. You are prompted to ensure a blank UFD is attached.8. Select Continue. A warning is displayed that all contents will be lost on the UFD.