Kaba E-PLEX 2000 Operation Manual

Also see for E-PLEX 2000: Operation manual Installation instructions Installation instructions Quick reference guide

Kaba E-PLEX 2000 Operation Manual Manual pdf 12 page image

12F-3 Example of Complete Entry: 008#02#.F-4 Enter another # to indicate the end of programming.F-5 The lock will now sound the buzzer at the desired volumeNormal, until you change it.Users - General Information1. Master and Manager Codes can do two different things:• Open the door by entering the Access Code without # signs.• Put the lock into Pushbutton Programming Mode by entering # beforeand after their Access Code.2. Each user (Manager User, Service User or Access User) occupies one of theavailable 100 locations in the user table.3. By default, user 000 is the Master User.4. Users have a 15-second period to enter the entire key sequence, and 5 sec-onds between pressing each pushbutton number. If they pause longer than5 seconds between each pushbutton pressed, or exceed the 15-secondperiod to enter the total sequence, the lock:• aborts the current programming sequence• automatically exits the programming state• sends the user a ‘Keypad Timeout’ feedback messageNote: Correct errors during a command sequence. If an invalid entryoccurs, recover from the mistake by entering the (*) key, which will clear allentries made from the beginning of the current command sequence, and willreset the 15-second time limit for entering the code. In this case, you stillhave 15 seconds from the first number entered to enter the whole code.User LevelsFour different classifications of users can perform various operations at the lock.Master User - The Master User is the top-level manager who performs the ini-tial lock setup activities and can program all lock functions. There is a maxi-mum of one Master User per lock.Manager - A Manager can program all lock functions except:• defining the Access User Code length• modifying master user Access Code• resetting to default value• activating lockout mode• adding / deleting / enabling / disabling a Manager User. The number ofManagers is limited only by available user table space (99 maximumbecause one (000) is reserved for the Master Code).Access User - An Access User has the ability to open the lock. The number ofAccess Users is limited only by available user table space (99 maximumbecause one (000) is reserved for the Master Code).