Kaba E-PLEX 2000 Operation Manual

Also see for E-PLEX 2000: Operation manual Installation instructions Installation instructions Quick reference guide

Kaba E-PLEX 2000 Operation Manual Manual pdf 18 page image

16H-5 Enter the code 1224# again.H-6 Example of Complete Entry: 101#024#1224#1224#.H-7 Enter another # to indicate the end of programming.H-8 The Manager Access Code 1224 will now work in that door with all theaccess privileges assigned to a Manager User.H-9 Manager Users can open the door by just entering the Access Codewithout the # signs, or put the lock into Pushbutton Programming Modeby entering # before and after their Access Code.I. ADD/MODIFY SERVICE USER ACCESS CODEA Service User is any person who needs access to the lock for a limited timeperiod in order to perform a service, such as painting or repairs in the room orarea. A Service User Access Code allows the service person to enter, exit andre-enter using that code for a certain number of hours.Required User Level: Master, ManagerI-1 Put the lock into Pushbutton Programming Mode.I-2 Enter Command 102# to add /modify a Service User Access Code.I-3 Enter the Service User ID location (a three-digit number you have on a listthat you should carry with you) followed by #, for example 025#.I-4 Enter UUUUUUUU#, representing a User Access Code of between 4 and8 numbers depending on the length of Access Code that you selected inProcedure 1 on page 7. For example, if your code length is 4 digits, it couldbe 2240#.I-5 Enter the code 2240# again.I-6 Now enter the number of hours, programmable between 01 and 24, forexample 06. If you enter a Service Access Code of 00, you can only enterthe door once. If the door shuts upon exiting, you will not be able to re-enter. This type of access is called a “one-shot” code.I-7 Example of Complete Entry: 102#025#2240#2240#06#.I-8 Enter another # to indicate the end of programming.I-9 The Service User Access Code 2240 will now work in that door, with allthe access privileges assigned to a Service User for a period of 6 hoursfrom the time the Service User enters his Access Code.