Kaba E-PLEX 2000 Operation Manual

Also see for E-PLEX 2000: Operation manual Installation instructions Installation instructions Quick reference guide

Kaba E-PLEX 2000 Operation Manual Manual pdf 20 page image

18L-4 Example of complete entry: 202#025#.L-5 Enter another # to indicate the end of programming.L-6 You have now deleted a Service User ID location, and (indirectly) his accesscode, allowing you to assign that number to another Service User if you wish.M. DELETE ALL ACCESS CODESEXCEPT MASTER AND MANAGERAll codes may be deleted together if you are changing everything because of,for example, suspected theft of codes. Warning - be sure that you want to dothis, because re-creating codes for all the personnel will be time-consuming atthe pushbuttons.Required User Level: Master, ManagerM-1 Put the lock into Pushbutton Programming Mode.M-2 Enter Command 299# to delete all Access and Service User Codes.M-3 Enter another # to indicate the end of programming.M-4 You have now deleted all User Access Codes, allowing you to re-assignAccess Codes from 0000{0000} to 9999{9999}, if not used by Master orManagers.N. ACTIVATE USER ACCESS CODESA User Code should be activated if it has been de-activated for a certain timeperiod - during a user’s vacation, for example, or if you created an Access Codebut never assigned it to a user. User Codes that are inactive, but might be neededsome time in the future, should be de-activated rather than deleted.Required User Level: Master, ManagerN-1 Put the lock into Pushbutton Programming Mode.N-2 Enter Command 300# to activate a User Code.N-3 Enter the ID location NNN #, where NNN is the specific User ID location,023 for example.N-4 Example of complete entry: 300 #023#.N-5 Enter another # to indicate the end of programming.N-6 You have now activated the User Access Code assigned to 023.