Kanguru kclone-5hd-twr User Manual

Kanguru kclone-5hd-twr User Manual Manual pdf 16 page image

162.4 DuplicationIMPorTaNT! Insert all Master and Target hard drives before you execute a Copy operation.To execute the duplication of a Master hard drive:1. From the Main menu, press the UP or DoWN button to navigate to the desired copy mode. Formore information on the different copy modes see section 2.2 Duplication Modes on page 13.[BRIEF ] COPY0 PASS 0 FAILCopy ModeCopy and/or Compare enabledTotal successful copies Total failed copies2. Once you have selected the desired copy mode, press the ENT button to execute the copyfunction. Before the duplication process begins the system will check for any connected drives.3. Once all drives have been detected and initialized, the duplication process begins. During theduplication process the LCD screen will display the following information:[BRIEF ]COPY (T:5)51M 21.32% 130GCopy modeTransfer rateCopy or Compare in progress% completedNumber of targetsData remainingWarNING! Do not remove any drives while duplication is in process. If you want to stop theduplication process, press the ESC button to cancel at any time.4. Once the copy process has completed the Kanguru Clone will list each Target drive locationwith either a “V” or “X”.○ V - Appears next to any drive verified to have completed duplication successfully.○ X - Appears if a drive failed duplication for any reason. When a drive fails duplication, anerror code can be generated. For a list of common error codes and their meanings, please seechapter 5. Error Code List on page 27.○ KCLONE-5HD-TWR press the UP button to view error codes○ KCLONE-11HD-TWR press and hold the ENT button to view error codes[BRIEF ]COPY1:X 2:V 3:V 4:V 5:V[BRIEF ]COPY1:K 2:11 3:11 4:11 5:115. Press any button to return to the Main menu. The duplicator will automatically keep a runningcount of the number of passed and failed duplications until you change copy modes.[BRIEF ]COPY4 PASS 1 FAILDuplication