Kanguru kclone-5hd-twr User Manual

Kanguru kclone-5hd-twr User Manual Manual pdf 24 page image

244.14 System InfoSYSTEM INFO allows you to view information regarding your duplicator’s firmware version andbuild number.To view the system information:1. From the SETUP menu, press the UP or DoWN button to navigate to the SYSTEM INFOfunction.2. Press the ENT button to begin viewing information for your duplicator:KANGURU DUPLICATORVER: 4.03 BLD:04073. Press the ESC button to exit to the Setup menu.4.15 Total Copy CountTOTAL COPY COUNT keeps track of the total number of successful and unsuccessful duplicationsproduced by the system. This is a running count that includes all copy modes.1. From the SETUP menu, press the UP or DoWN button to navigate to the TOTAL COPYCOUNT function.2. Press the ENT button to view the copy counts:Total Pass: 00000114Total Bad : 000000063. Press the any button to exit to the Setup menu.4.16 Set to DefaultSET TO DEFAULT allows you to restore all settings back to their factory default values.To reset your duplicator to its original default configuration:1. From the Setup menu, press the UP or DoWN button to navigate to the SET TO DEFAULTfunction.2. Press the ENT button. The screen will display a message asking you to confirm the reset. Pressthe ENT button to confirm, or press the ESC button to cancel.ARE YOU SURE?ESC->NO, ENT->YES3. Once the reset has been completed, you will be displayed a confirmation message on the screen.Press any button to return to the Setup menu.System Info / Total Copy Count / Set to Default