Kasco 8400JF Owner's Instructions Manual

Also see for 3.1JF: Operation & maintenance manual Operation & maintenance manual

Kasco 8400JF Owner's Instructions Manual Manual pdf 4 page image

4• #10 x 1” long or longer screw(s) for mounting thecontrol panel (4)• 7/16” Socket & Wrench (1)• 7/16” Wrench (1)• 9/16” Socket & Wrench (1)• 9/16” Wrench or adjustable crescent wrench (1)• Flat head screw driver (1)Assembly Instructions1. Remove all contents from package and place ona clean, flat surface. Inspect the shipment for anydamages. If damages are found, immediately notifyyour carrier and your Kasco Marine, Inc. representa-tive. Next, cross reference the parts included in theshipment with the Parts Included sheet in this manual.Make sure you have all the parts needed. If any short-ages are found, contact your Kasco representativeimmediately.2. Arrange the three Float Sections (Part #B1) upright(plug on bottom) so the overlap of one section alignswith the next section and loosely push the three sec-tions together to form a continuous ring.8400JF, 3.1JF, 2.3JF, 3.3JF5.1JF, 5.3JF, 7.3JFControl Panel in separate box (1) (if purchased)Set of Interchangeable Nozzles (5) (Diagrams)# Item Part # Qty1 #6 x 1/2” Self Tap Screw 820405 32 3/8” x 4” bolt 820090 13a Linden Nozzle (2, 3 HP) 820110 13b Linden Nozzle (5 HP) 820109 13c Linden Nozzle (7.5 HP) 703320 14a Redwood Y Insert (2 HP) (in #7) 820170 14b Redwood Y Insert (3 HP) (in #7) 820332 14c Redwood Y Insert (5 HP) (in #7) 820352 15 Juniper Nozzle 820140 16 Willow Nozzle 820150 17a Redwood/Spruce Nozzle (2 HP) 820160 17b Redwood/Spruce Nozzle (3 HP) 820330 17c Redwood/Spruce Nozzle (5 HP) 820350 18a Sequoia Nozzle (5 HP) 820130 18b Sequoia Nozzle (7.5 HP) 703200 19 3/8” x 2.5” Bolt 820095 18400JF, 3.1JF, 2.3JF, 3.3JF Nozzle Diagram5.1JF, 5.3JF Nozzle Diagram7.3JF Nozzles include linden and sequoia.NOTE: Extra hardware may be included.Tools & Supplies Needed• Anchors or stakes for installing unit (3)• Philips head screw driver for mounting C-85• Electrical Supply near pond on a post with roomfor mounting the control panel• Three 12” galvanized pipe for weighting ropes(optional)