31SETTING DVB-C DEMODULATION PARAMETERS[DEMOD] Press the [DEMOD] button to go to the demodulationselection:For QAM64 demodulation press [1].If you do not wish to change the modulation type, press [OK].• 1 = QAM64 demodulation• 2 = QAM128 demodulation• 3 = DOCSIS QAM 64 demodulation• 4 = QAM256 demodulationAfter selecting the modulation type you are automatically directedto the symbol rate entry.Select the appropriate symbol rate by pressing [1] to [4].LC display:• 1 = 6.900 MS• 2 = 6.952 MS• 3 = 6.875 MS• 4 = USERPress the [4] button to go to the menu for USER entry of thesymbol rate.Enter the desired symbol rate and complete your entry by pressingthe [OK] button.After selecting the symbol rate you are automatically directed tothe HF standard switch.TV MEASUREMENTHF STANDARD SWITCH FOR ANALOGUE TV[1]...[6] Select standardAfter that the DEMOD menu is exited automatically.If you wish to keep the settings unchanged, press [OK]. Pleasenote that the selected standard remains even after the device isswitched off.Press the [DEMOD] button to exit the menu at any time.NoteANALOGUE AND DIGITAL TERRESTRIAL TV RECEPTIONIn TERR mode the MSK 125 can be set to the “Analogue” and “DVB-T/H” reception types.ANALOGUE TERRESTRIAL / DVB-T/H SWITCHPress once = Analogue terrestrial TVpress again = DVB-T/Hpress again = Back to analogue terrestrial TV[TERR A/D]
