40FM MEASUREMENTLEVEL OVERFLOW AND UNDERFLOWAt a level < 30 dBμV the display indicates an underflow.LC display:• Frequency: 104.8 MHz• Operating mode: FM• Level: UnderflowAt a level > 120 dBμV the LC display indicates an overflow.LC display:• Frequency: 104.8 MHz• Operating mode: TV• Level: OverflowFINDING INDIVIDUAL RECEPTION FREQUENCIESThe [LEV] function allows you to adjust the antenna to the maximumreception signal. The display indicates the reception in the form ofan increasing or decreasing bar. The [<] [>] buttons allow you to setthe measurement range to three sensitivity levels.The bearing sound enables you to monitor the level. The pitch ofthe bearing sound is proportional to the received signal level. Thevolume of the bearing sound can be adjusted using the [Vol-] [Vol+]volume buttons.COMMAND OVERVIEW FOR “FINDING”[LEV] Switch to “Find” operating mode[<] [>] Switch the measurement range, the bar graph andthe bearing sound:Level range 1: Large input levelsLevel range 2: Medium input levelsLevel range 3: Small input levels[LEV] Exit this modeLC display:• Level range 2: Medium input level• Operating mode: TV• Bar graph displayExampleLaunching the “Find level” function:Press the [LEV] button.Turn the antenna until the bar display reaches its maximum.If necessary, decrease or increase the sensitivity using the [<] [>]buttons.Turn the antenna until you have reached the maximum level.To exit “Find level”:Press the [LEV] button.
