Kathrein UFD 346 Operating Instructions Manual

Also see for UFD 346: Operating instructions

Kathrein UFD 346 Operating Instructions Manual Manual pdf 16 page image

Selecting TV Programs16Selecting TV ProgramsThe satellite receiver has already been pre-programmed by the manufacturer as asatellite reception system with a feeder system working with a 9.75 GHz oscillatorfrequency. All selected programs are shown in the accompanying table.If you are going to use your satellite reception system with a feeder system thatuses a different frequency, you must set the receiver to the oscillator frequencyduring the installation.This is explained in the section ”Basic Setting-up, Oscillator Frequency”.Setting-up TV ProgramsWhen selecting new TV programs, the corresponding video and audio receivingparameters must be set-up.The up-to-date program allocation details can be obtained from satellite programmagazines or from SAT 1 videotext, starting at page 516.• First select the channel number where you wish to save the new program.• Call up the video-menu, by pressing these + buttons consecutively.or• Call up the audio-menu, by pressing these + buttons consecutively.• Switch between video and audio menus by pressing either of thesebuttons.• Select the required menu line by pressing these buttons.• The numbers may be entered directly by pressing these buttons.or• You may step through the values by using these buttons.• Press this button twice, to save your settings.• Exit the menu by pressing this button.Important You may leave any setting-up mode at any time (without saving) and return to thenormal mode by pressing this buttonThe ”Video” MenuThe following settings may be made within the video menu:Channel: P002Program name: ZDFSat-frequency: 10964 MHzPolarity: Hor. LowOrbital position: 1Hub: 16 MHzOscillator: LO 1Decoder menu...0-9 VOL VID AUD A/B STBY STORThe status line at the bottom of the menu displays the buttons that you must use tochange the settings.All manuals and user guides at all-guides.comall-guides.com