Kathrein UFD 346 Operating Instructions Manual

Also see for UFD 346: Operating instructions

Kathrein UFD 346 Operating Instructions Manual Manual pdf 26 page image

Basic Setting-up26"EEPROM" Menu OptionThe menu option "EEPROM" is provided so that the service technician may readthe program data in and out.Remote Control Command Set SwitchingThe remote control includes 2 sets of command instructions. Therefore it is possi-ble to operate 2 independent 200 and 300 series satellite receivers in a room withonly 1 remote-controller. (not applicable to a Twin-receiver).Program the first receiver to work with command set 1, and second receiver withcommand set 2.• Switch receiver 1 on and receiver 2 off (using the units ON/OFF switch).− Press and hold down this button.− Using the number buttons enter ”001”.• Switch receiver 1 off and receiver 2 on (using the units ON/OFF switch).− Press and hold down this button.− Using the number buttons enter ”002”.• Switch receiver 1 back on.− Press and hold down this button.− Using the number buttons enter ”003”.Important With the first pair of settings, the remote controller is set to switch to the requiredreceiver.With this button you can switch between the two command sets A & B (tog-gle mode) and therefore alternate between and operate both receivers.When delivered from the manufacturer, command set 1 is the default mode.Important If you are using only one receiver and due to an operating error the system hasswitched out of the default operating set, so that you no longer have control of thereceiver, the remote controller may be easily switched back over to the correctcommand set 1. How to achieve this is described above.All manuals and user guides at all-guides.comall-guides.com