Kathrein UFD 515 Operating Manual

Also see for UFD 515: Mode d'emploi Operating manual Mode d'emploi

Contents

Kathrein UFD 515 Operating Manual Manual pdf 19 page image

On screen displays / OSDWith the or button, exit the help function and return to themain menu. Press the button again and return to the originallyreceived programme.TV channel identifierThe channel identifier is displayed for several seconds every time thechannel is changed or by pressing the button. The indicatesthat a channel is received even if no picture can be seen (e.g. radio).The film symbol indicates a TV channel and appears along with thetime, and whether teletext is received. The + in the third line standsfor the programme selection from the main programme list. If thefavourite list is selected, the "apple" symbol appears. This is followedby the programme title, as well as start time and end time of therunning programme, provided this data is transmitted.Radio channel identifierThe identifier for the set radio channel has the same configuration. Aradio appears in the upper right-hand corner indicating a radiochannel. Programme times and text are displayed only if thecorresponding data are transmitted with the signal.Error message"Bad or no signal" indicates that there is a fault in the receiving systemor in the receiver settings. If the transponder is not transmitting anysignals, the channel identifier shows a Sat antenna instead of .Check the Sat IF connection and the LNB configuration. As an aid,refer to the list of service settings provided at the end of the user’sguide.19